In the process of using the submersible pump deep water pump, why do you often find that the submersible pump has a fever problem?

Let's analyze it.1. When selecting the submersible pump, if the selected model head is too high and there is a big gap between the actual use and the head, it will cause the motor to over-current, and there will be heat or even burn the motor.2. If there are too many sundries in the working environment of the submersible pump, it will cause the impeller of the deep well pump to be blocked. If the impeller components cannot rotate, the motor will idling and heat up to burn out.3. When the submersible pump is working, if there is sediment entering the bearing or the gap connecting the impeller, the bearing will not work normally and the body will heat up.The above is the case that the submersible pump is hot. If you want the submersible pump to work better, you should pay attention to the maintenance of the submersible pump. If there is any problem, it should be repaired in time to ensure that the work is not affected. In addition, it is very important to purchase a good quality deep well pump. The quality of the submersible pump has a longer service life and a lower probability of failure, which can reduce the cost of replacing and repairing equipment for the enterprise.