How to use the submersible sewage pump?

(1) When the humidity sensor or temperature sensor issues an alarm, or when the pump body is running, the vibration and noise are abnormal; or when the output water pressure drops and the power consumption rises significantly, the submersible sewage pump should be shut down immediately for maintenance.

(2) When some submersible pumps with poor sealing are immersed in water for a long time, even if they are not used, the insulation value will gradually decrease, and finally it will not be used, even in the short time of working in the water than the continuous operation submersible sewage pump. Insulation disappears inside. Therefore, the submersible pump can not be used as a backup in the suction pool. If conditions permit, it can be used for dry standby outside the pool. When a submersible pump in operation fails, immediately stop the lift up and then put the spare pump down. go with.

(3) The submersible pump should not be opened or stopped too frequently, otherwise it will affect the service life of the submersible pump. When the submersible pump stops, the water in the pipeline will return to the water. At this time, the restart will cause the load of the electric pump to be overloaded and bear unnecessary impact load. In addition, the submersible pump will open and stop too often to damage the impact. Poorly capable parts and damage to the entire electric pump.

(4) After the machine is stopped, it cannot be restarted until the motor is completely stopped.

(5) The power must be turned off when checking the electric pump.

(6) When working on the submersible pump, do not wash the items nearby, swim or put the animals into the water, so as to avoid electric shock when the electric pump leaks.