The booster pump, as its name implies, is a pump used for supercharging. Its main uses are water heater boosting, high-rise low water pressure, sauna, bathing, etc., the uppermost water pressure of the apartment is insufficient, and the solar energy is automatically pressurized. , reverse osmosis water purifier pressurization and so on.
The pneumatic booster pump is divided into a gas-liquid booster pump and a gas booster pump. The principle of the booster pump is to use the low pressure of a large area piston to generate a high hydraulic pressure of a small area piston. The industrial field is used for the clamping of the machine chuck, the accumulator is inflated, the high pressure bottle is inflated, and the compressed gas is converted into a high pressure gas. Any pressure source is not high enough, whether it is a mechanical or test device, a booster pump can be used.
It is driven by gas, without arc and spark, and is completely used in places with flammable or explosive liquid or gas. Regardless of the cause of the pressure drop in the holding circuit, the booster pump will automatically start to replenish the leak pressure and keep the circuit pressure constant. Compressed air, nitrogen, water vapor, natural gas, etc. can be used as a driving source for the pump.
Gas liquid type
Until the pressure balance is reached again, the single air-controlled unbalanced gas distribution valve is automatically stopped to realize the automatic reciprocating motion of the pump. The gas drive part of the pump body is made of aluminum alloy. The wetted parts are made of carbon steel or stainless steel according to the medium. The complete set of seals of the pump are imported high quality products, thus ensuring the performance of the gas-liquid booster pump.
The principle of the air booster pump is to use the low pressure of a large area piston to generate a high hydraulic pressure of a small area piston. The air booster pump is used in the working environment where the original air pressure system is to increase the pressure, and can increase the air pressure of the working system to 2-5 times, and only needs the compressed air in the working system as the air source. The pump is suitable for single gas source boosting. No power supply required (can be used in areas where explosion protection is required). In the pressure range of the pump, the regulating valve is adjusted to adjust the intake pressure, and the output hydraulic pressure is correspondingly adjusted to be infinitely adjusted.
The working pressure range of the chlorine booster pump is large. Different pressure zones can be used to obtain different pressure zones, and the input air pressure output pressure can be adjusted accordingly. Extremely high pressure can be achieved with a gas of 90Mpa. The flow range is wide, and it can work smoothly with only 0.1Kg of air pressure for all types of pumps. At this time, the minimum flow rate is obtained, and the flow rate can be adjusted to obtain different flow rates. Easy to control, from simple manual control to full automatic control. Automatic restart, for any reason, the pressure of the pressure-holding circuit drops, it will automatically restart, supplement the leakage pressure, and keep the circuit pressure constant. Safe operation, gas driven, no arc and spark, can be used in hazardous situations.
- Solar Pump, Also Known As Solar Photovoltaic Wa...
- Solar Pump System Installation And Use Of Small...
- Take You To The Mysterious Solar Pump System
- Centrifugal Pump Gas Binding And Cavitation Pre...
- Correct Installation Of Pressure Gauge
- Pressure Gauge Verification Method
- What Is A Solar Seawater Pump And How It Works
- How To Make The Centrifugal Pump Achieve Automa...
- What Is The Cause Of The Water Leak From The So...
- Characteristics Of Three Solar Seawater Pumps
- Basic Knowledge Of Booster Pumps
- What Is A Screw Pump?
- Solar Pumping System
- Working Principle And Characteristics Of Sewage...
- How To Increase The Self-priming Capacity Of No...