What are the top 10 reasons to install solar water pumps in the future?
1. Pump the pump to any place on the planet. No external power supply required
The solar system powers the DC pump so you can install it from any location. Once the system is installed and ready, it can run indefinitely. It requires some simple maintenance. The best energy efficiency of solar panels requires regular cleaning.
2. The technology and materials of solar water pumps are being updated.
Stainless steel is used in the pump casing and pumping mechanism to ensure proper hygiene and long life while being submerged in water. Stainless steel has been suspended in water for many years and is resistant to corrosion, much better than aluminum pump casings. The stainless steel housing is also hygienic and does not contaminate the water source. In addition, the pumping mechanism made of stainless steel can reduce the wear caused by sand and other particles while lifting water from the depths of the ground.
Brushless DC motors are among the most efficient DC motors on the market. One of the main advantages is that there is no need to remove it from the well to replace the brush, such as other DC motors. Brushless DC motors with maximum power point tracking (MPPT) controllers are more efficient than brushed motors.
3. Low system cost and easy to use
The past solar power systems were expensive and costing tens of thousands of dollars. Advances in technology have made low-cost systems possible and readily available. The main reason is the lower price of solar cells and panels. Solar cell manufacturing has progressed to a very affordable level. 10 times less than the previous cost!
4. No ongoing operating costs
There is no ongoing operating cost after the initial system cost. Every day, the sun shines, the sun shines, and the water is pumped out of the depths of the ground, saving you high electricity bills.
5. Much cheaper than installing the main power supply to a remote location
The main forces that are subtle are expensive in both time and money. This is one of the reasons why windmills in the past were so popular because they don't require electricity to run. "Today's windmill" is a solar power system that can pump water without connecting the main power. You are no longer limited to how long it takes to flood the power line underground or how long it takes.
6. Solar water pump is efficient
Due to advanced technology, solar water pumps are completely effective. Modern solar water pumps have been greatly improved over the past. They generate a lot of energy, require little maintenance, and can be expanded for commercial use. The height does not affect efficiency, so installing the panel close to the ground makes it easier to remove snow.
In cloudy weather, solar panels consume less energy, but they do not stop production completely. Even on a cloudy day, solar panels generate enough energy to pump water.
7. The system is modular and can be upgraded over time
The components that make up the solar pump system are very modular. They can be swapped out and upgraded as needed. If you add cloudy, low light, performance needs, you can add extra solar panels. If you need more water every day, you can add batteries and extra panels, so you can pump at night. If more volume is needed, the pump can be easily replaced with a higher power model that provides higher flow.
8. Owners and farmers can benefit
On the farm, solar powered pumps maintain irrigation functions to sustain land and crop growth. Currently, China is using solar water pumps to help farmers irrigate crops.
Solar powered pump systems may be ideal for individual homeowners as well as larger residential and commercial properties. For example, an apartment building that relies on a well can see lower operating costs by installing a solar powered pump on the property.
9. Cheap maintenance
The most important maintenance task is to keep the solar panels and the inside of the battery clean. It allows the system to generate enough energy to run the pump. Typically, cleaning involves the use of soapy water to remove dust, dirt and dust from the panel. It is usually cleaned once a year.
10. Easy to install
Professionals may install solar water pumps, but they can do it themselves. The power system is native, so there is no need to run main power or extend the power supply to a remote location. For farmers with large amounts of land, this feature can significantly reduce costs. Its cost is relatively small because the system is simple.
Previous: No Information
Next: Happy New Year 2019
- Solar Pump, Also Known As Solar Photovoltaic Wa...
- Solar Pump System Installation And Use Of Small...
- Take You To The Mysterious Solar Pump System
- Centrifugal Pump Gas Binding And Cavitation Pre...
- Correct Installation Of Pressure Gauge
- Pressure Gauge Verification Method
- What Is A Solar Seawater Pump And How It Works
- How To Make The Centrifugal Pump Achieve Automa...
- What Is The Cause Of The Water Leak From The So...
- Characteristics Of Three Solar Seawater Pumps