Which places need circulating pumps?

It is widely used in industrial, urban water supply, drainage, farmland, orchard irrigation and drainage, for transporting clear water or other liquids with similar physical and chemical properties. Zhongkai pump relies on centrifugal principle to extract liquid materials. Zhongkai pump made of special materials is suitable for extracting corrosive liquid and liquid containing a certain amount of solid particles.

The circulating pump is installed horizontally. The pump shell is separated horizontally on the axis line. The upper part is the pump cover and the lower part is the pump body. The suction and discharge ports are on the pump body below the pump axis. The center line is vertical to the axis. During maintenance, the pump cover can be opened and the rotor parts can be taken out without dismantling the water inlet and outlet pipes. The pump bearings are all rolling bearings, and the end cover seal of bearing is skeleton oil seal.

The shaft seal of circulating pump adopts soft packing seal and mechanical seal.

Rotation direction of circulating pump: from the motor end to the pump, it rotates counterclockwise, that is, the suction inlet is on the left and the discharge outlet is on the right. The driving end can also be moved to the other end of the pump according to the user's requirements. At this time, the direction of steering, suction and discharge is opposite to the above.

Material of main parts of circulating pump: the flow passage parts of the pump are made of cast iron. If the user needs, the impeller can also be made of cast steel and brass, but it must be indicated in the order contract.