What are the precautions for using solar water pumps?

Folding prevents particles from entering

(1) Ferromagnetic impurities and particles are not allowed to enter the magnetic actuator and the bearing friction pair;

(2) After transporting the medium which is easy to crystallize or precipitate, it should be flushed in time (after pumping, pump the water into the pump chamber and discharge it after 1 minute) to ensure the service life of the sliding bearing;

(3) When transporting media containing solid particles, it should be filtered at the inlet of the pump flow tube.

Folding to prevent demagnetization

(DC water pump)

It should be operated under the specified temperature conditions, and the medium temperature is strictly prohibited. A platinum resistance temperature sensor can be installed on the outer surface of the magnetic pump isolation sleeve to detect the temperature rise of the annulus region, so that the alarm or shutdown occurs when the temperature exceeds the limit.

Folding to prevent dry friction

Minimize idle time.