How to deal with the problem of large power consumption in operation of clean water pump?
Clean water pump In the operation of large power consumption, the reasons and treatment methods are as follows:
(1) impeller and wear-resistant ring, impeller and Shell have grinding sassafras. The treatment is to check and repair.
(2) Too much traffic during operation. The approach is to reduce traffic.
(3) Increase in liquid density. The treatment method is to check the liquid density.
(4) The packing is pressed too tightly or dry rub. The treatment method is to loosen the filler and check the water sealing pipe.
(5) Bearing damage. The treatment is to check the repair or replacement of the bearings.
(6) High speed. The solution is to check the driver and power supply.
(7) Bending of pump shaft. The treatment method is to correct the pump shaft.
(8) The Axial force balancing device failed. The treatment method is to check the balance hole, the return pipe is blocked.
(9) The coupling is too small for the bad or the axial clearance. The processing method is to check the condition and adjust the axial clearance.
- Solar Pump, Also Known As Solar Photovoltaic Wa...
- Solar Pump System Installation And Use Of Small...
- Take You To The Mysterious Solar Pump System
- Centrifugal Pump Gas Binding And Cavitation Pre...
- Correct Installation Of Pressure Gauge
- Pressure Gauge Verification Method
- What Is A Solar Seawater Pump And How It Works
- How To Make The Centrifugal Pump Achieve Automa...
- What Is The Cause Of The Water Leak From The So...
- Characteristics Of Three Solar Seawater Pumps
- Use Of The Pump, The Pump Uses What?
- How To Choose Agricultural Small Submersible Pu...
- China Pump Industry Development
- How To Adjust Measures To Local Conditions To C...
- Talk about the developing trends of high-lift c...
- Booster Pump
- Basic Knowledge Of Booster Pumps
- What Is A Screw Pump?
- Solar Pumping System
- Working Principle And Characteristics Of Sewage...